Gallagher Fence Tester/Fault Locator

This fence tester from Gallagher is a voltmeter and ammeter in one. With the voltmeter function you check the voltage at the fence and at the earth. With a simple push of a button you can switch to the current measuring function (ammeter).

A high current flow is an indication of unwanted conductors, i.e. there are defects or faults in the pasture fence. With the help of the ammeter function, faults in the pasture fence can be found and remedied very easily. The arrow in the display indicates the direction in which the fault is located. The Gallagher Fault Finder is suitable for almost any current conductor - from 40 mm wide strip to rope/cord, stranded wire and all wire shapes.

• Unique Gallagher Volt and Amp Meter
• With this device you can measure the voltage on your fence and quickly find and correct faults
• The arrow on the display points in the direction of the fault
• This therefore saves time when searching for the problem