Gallagher cord connector with wingnut - pack of 4.
Gallagher Wire clip (Jount Clamp Bobbin) - round, pack of 10.
Gallagher Wire clip (Jount Clamp Angle) curved. You can choose between pack of 10 or 100, including winged nut or nut.
Gallagher Tape joiner 12,5/20mm - pack of 5.
Gallagher Tape joiner 20/40 mm stainless steel - pack of 5.
Gallagher Connection plate goes together with our turbo corner tape insulator. Combination of tape connector makes interconnections and gate anchor.
Gallagher connecting cable set, tape (tape energiser connector) - 1,3 m
This simple tensioner helps you to tension your wire or EquiFence fence not only during erection, but also afterwards. Simply insert it anywhere in the fence and use the tensioning bracket to achieve secure tensioning.
Cord tensioner with roll corner insulator (Rope Tensioner)
Gallagher Tension Spring (High Tensile wire, 2.5 mm/2.65 mm).
Strainrite Electric Fencing crimp sleeves – Genuine high quality crimps manufactured in New Zealand and supplied in pack of 50.
Strainrite Barbed Wire crimp sleeves are high quality crimps that are manufactured in New Zealand and supplied in quantities of 50.
5 mm Strainrite crimp sleeves – Genuine high quality crimps manufactured in New Zealand and supplied in tubs of 50.
4 mm Strainrite crimp sleeves – Genuine high quality crimps manufactured in New Zealand and supplied in packs of 50.
3.15 mm Strainrite crimp sleeves – Genuine high quality crimps manufactured in New Zealand and supplied in 50s.
The Gripple Wire Joiner & Tensioner (large) is for use with tension mild steel up to 4 mm or steel and barbed wire up to 2.0 mm to 2.5 mm.
2.5 mm Strainrite crimp sleeves – Genuine high quality crimps manufactured in New Zealand and supplied in tubs of 100.
Electric fence connectors make sure the electric fence rope, wire, or tape is joined securely. The shock behind the connection may be insufficient or have gone if the conductors are not connected properly. This will greatly reduce the effectiveness of the electric fence. To guarantee that the current flows through each connection, a rope joiner, tape connector, or wire clamp must be used. Clearly mark: Due to the insulating properties of rust, the voltage on the fence will be lowered. Metal electric fence connectors are given a rust-prevention treatment.
There are several types of electric fence connectors available, including:
To use electric fence connectors, follow these general steps:
To use electric fence tape connectors, follow these steps:
To connect electric fences, you will need to use connectors to attach the wires, posts, and other components of the fence. Start by planning your fence layout and determining the necessary materials, such as the type and number of connectors needed.
When connecting electric fence wires, it is important to make sure that the wires do not touch each other. If the wires touch, the electric current will flow between them, short-circuiting the fence and reducing its effectiveness. Use insulators to separate the wires and keep them from touching each other, especially at corners and intersections where wires may cross. Make sure you test the setup with an electric fence tester.