Strainrite
This is the top of the range EzePull UltraCrimp 5 in 1 fencing tool from Strainrite.
The MKIII Threaded Clamp Netting Fence Strainer Board also known as "Sheep Netting Board" is compatible with most mesh and hinged / ring joint netting, this is Strainrites 900mm model, which has been designed in the field by farmers, for farmers!
RX2 Contractor Chain Strainer with removable handle
This is the original EzePull Fencing Tool, the EzePull 4 in 1 Multi Tool.
Taking down a wire fence? With Strainrite's Staple Puller, you won't be resorting to the hammer and fencing pliers!
The Strainrite XT1 Ratchet Strainer may well be the most versatile and superbly designed wire strainer available today. The tensioner is particularly strong, reliable and easy to use.
This easily held tool is used for neat and easy fence wire tying on high tensile wire, keeping your wire twists nice and tight.
New & Improved MK2 Model castings - features computer designed geometry**
Solid one piece handle of 22.2mm outside nominal diameter. High tensile pivot bolt for extra strength and high wear qualities. Features two grab and swivel ends for easy left and r
IMPROVED SURE GRIP MODEL - For zinc coated wire
New geometry provides effective grip on new Zinc/Aluminum fencing wire.
4 mm Strainrite crimp sleeves – Genuine high quality crimps manufactured in New Zealand and supplied in packs of 50.
Twice the Wire capacity of the single titan Wire Jenny
Strainrite's Universal Ratchet Handle makes using our wire strainers even easier!
Strainrite's Hi-Strain Insulated Clip Strainer is a high quality, insulated, all in one wire tensioner for electric fence wire. Includes 20 pieces.
5 mm Strainrite crimp sleeves – Genuine high quality crimps manufactured in New Zealand and supplied in tubs of 50.
Make life easier and save your back with Strainrite's Helix Wire Winding Jenny.
2.5 mm Strainrite crimp sleeves – Genuine high quality crimps manufactured in New Zealand and supplied in tubs of 100.
The Strainrite Permanent 4 Arm Wire Jenny Dispenser features quick adjust wire guide fingers, 12 mm diameter for extra strength.
Spring Kit to hold claws of chain strainer onto chain. Easy to use one hand operation.
This is the Strainrite HT Wire Cutter, a must have tool for anyone working with wire of any thickness. Has a scalloped jaw design for easily holding the wire while cutting.
3.15 mm Strainrite crimp sleeves – Genuine high quality crimps manufactured in New Zealand and supplied in 50s.
Strainrite's EzeCrimp 3 in 1 tool is and excellent and very high quality crimping tool that can exert considerable pressure. It is suitable for use with the complete range of Strainrite crimps.
Digging post holes is rarely considered an easy job, but Strainrite's Double Digger certainly does make it easier!