Electric fence polywire is the most commonly used type of electric fence wire. It is made from multiple strands of thin wire, consisting of stainless steel and sometimes copper, braided with plastic wires for flexibility and durability. Polywire is lightweight and flexible, making it easy to install, move, or reconfigure for different fencing needs. It can be used for mobile fencing and is suitable for almost all animal species, except for horses. We especially recommend polywire for cattle, sheep and goats. This wire is easy to install and can be tensioned by hand. This wire is also often chosen by our customers as an affordable fencing sollution. Blue polywire has been specially developed for wild animals, because they can see the colour blue better at night.
Types of electric fence polywire
We offer different types of electric fence polywire. Some of our types include:
- Standard polywire: This is a basic polywire that is suitable for temporary or portable fencing systems.
- UV-resistant polywire: This type of polywire is designed to be resistant to UV rays and can last longer in outdoor environments.
- Reflective polywire: This type of polywire has reflective strands that make it more visible in low light conditions.
How to join electric fence polywire
Electric fence polywire can be joined using wire/cord connectors. These connectors ensure that the voltage on the electric fence remains stable while olso staying firmly connected. To join electric fence polywire, you can use a special connector or splice. The connector has two prongs that are inserted into the ends of the wire and then twisted to secure the connection. This can be done manually with a pair of pliers or with the help of a connector tool.
How to splice electric fence polywire
Another way to join electric fence polywire is by splicing it. To splice electric fence polywire, you will need to strip the insulation off of the ends of the wire, overlap the wire and twist them together. Then use electrical tape to wrap the wire and complete the splice. This method is useful if you need to join the wire in the middle of a run, rather than at the end. You can easily splice or cut electric fence polywire using a special plier.
How to install electric fence with polywire
To install an electric fence with polywire, follow these steps:
- Determine the layout of your fence. Measure the area you want to enclose and mark the location of the fence posts.
- Install the fence posts according to the manufacturer's instructions.
- Attach the insulators to the fence posts.
- Unroll the polywire and attach it to the insulators using wire clips or other fasteners.
- Connect the energiser to the fence using the appropriate connectors.
- Test the fence to make sure it is working properly.
FAQ’s about polywire
how to connect polywire to an energiser?
To connect polywire to an energiser, you need to use an end insulator to secure the wire to a fence post and attach a gate handle if you're making a gate. Then, connect the polywire to the energiser's output terminal using a connector clamp or crocodile clip. Ensure the connection is tight to allow a continuous flow of electricity. It’s important to check that the polywire is properly tensioned and free of any breakages. Finally, connect the earth terminal of the energiser to an earth rod to complete the circuit.
Can I use polywire for poultry?
Yes, polywire can be used for poultry, especially for creating portable or temporary enclosures.However, the wires should be installed at a low height and tensioned correctly to prevent birds from flying or jumping over. Multiple wires in close distance of one another is recommended. Or an easier solution would be getting poultry netting.
