Gallagher cord connector with wingnut - pack of 4.
Gallagher Wire clip (Jount Clamp Bobbin) - round, pack of 10.
Gallagher Wire clip (Jount Clamp Angle) curved. You can choose between pack of 10 or 100, including winged nut or nut.
Gallagher Tape joiner 20/40 mm stainless steel - pack of 5.
Gallagher Connection plate goes together with our turbo corner tape insulator. Combination of tape connector makes interconnections and gate anchor.
Gallagher connecting cable set, tape (tape energiser connector) - 1,3 m
Cord tensioner with roll corner insulator (Rope Tensioner)
Gallagher Tension Spring (High Tensile wire, 2.5 mm/2.65 mm).
With the SMS remote with power failure alarm, you can switch all mains energisers on and off by texting with your mobile phone
Gallagher MB series 12V Battery Backup system
Gallagher Wire clip (Jount Clamp Bobbin) - round, pack of 100 pieces.
Connect a 12V battery to your Gallagher MB/MBS energiser.
Suitable for: MB150, MB300, MBS200, MBS400, MBS800, MB1000, MBS1800i, MBS2800
Gallagher Wire clip (Jount Clamp Angle) curved. You can choose between pack of 10 or 100, including winged nut or nut.
Electric fence connectors make sure the electric fence rope, wire, or tape is joined securely. The shock behind the connection may be insufficient or have gone if the conductors are not connected properly. This will greatly reduce the effectiveness of the electric fence. To guarantee that the current flows through each connection, a rope joiner, tape connector, or wire clamp must be used. Clearly mark: Due to the insulating properties of rust, the voltage on the fence will be lowered. Metal electric fence connectors are given a rust-prevention treatment.
There are several types of electric fence connectors available, including:
To use electric fence connectors, follow these general steps:
To use electric fence tape connectors, follow these steps:
To connect electric fences, you will need to use connectors to attach the wires, posts, and other components of the fence. Start by planning your fence layout and determining the necessary materials, such as the type and number of connectors needed.
When connecting electric fence wires, it is important to make sure that the wires do not touch each other. If the wires touch, the electric current will flow between them, short-circuiting the fence and reducing its effectiveness. Use insulators to separate the wires and keep them from touching each other, especially at corners and intersections where wires may cross. Make sure you test the setup with an electric fence tester.