Waterproof Time Switch - Infresco Soft Start (4/6kW) | Stable Yard Heating
Electric Fence Online Waterproof Time Switch - Infresco Soft Start (4/6kW) | Stable Yard Heating
Rated at IP65 this waterproof Time Switch will help ensure that you don't waste energy heating an area that isn't occupied.
Install wherever the controlled heat is required and pressing the red button will switch on your heater for a pre-determined time of anything between one and forty (1 - 40) minutes. Ideal for any area where going inside to switch on the heater would be inconvenient.
The 'Soft Start' element of the Infresco Passive Infrared detector switch refers to the third environmentally sound feature of this switch; this is a slow start switching system that automatically starts up the heater at a lower power level and 'gradually' increases the supplied energy to optimum level approximately a second later. This may not sound like much, but it will increase the life of your lamps by up to 30%...
- 4kW load switching capacity
- Time lag can be set for 1 minute to an maximum of 40 minutes.
- Reliable, easy to install maintenance free.
- Can be installed with new heaters or retro-fitted to existing heaters
- Fully waterproof - can be mounted to an external surface
- Voltage: 230V
- Max switching load: 4000W infra-red heating
- IP rating: IP55 Waterproof
Important - Please Note: There are two (2) versions of the Waterproof Time Switch - Infresco Soft Switching Controller available; a 4kW version and a 6kW version. Please ensure you select the correct version below i.e. the switch must not be a lower rating that the combined total kW of the heaters being connected.
Need help? Contact our experts!
Phone: 0121 281 8163