1m Electric Pipe Heating Cable
Electric Fence Online 1m Electric Pipe Heating Cable
No Frozen Pipes for you this winter!
Electric Pipe Heating Cables are designed to prevent plastic and copper water pipes up to 38mm from freezing and ensure your water supply is maintained.
Select a cable roughly double the length of the pipe you wish to protect from frost, wrap it around the water pipe and then secure the heating cable to the pipe using either cable ties, or an insulated adhesive tape. Plug the cable into your waterproof (or indoor) mains socket and that’s it!
The thermostat will switch on the heating cable when the temperature drops below 3˚C and turns off again once the temperature rises above roughly 10˚C. For maximum protection and particularly for exposed water pipes, we would recommend adding a good pipe lagging or insulation tube, which could protect your water pipe down to as low as -40˚C.
Water pipe heaters are suitable for indoor and outdoor use and will protect your water taps and water supply pipes from freezing, but if installing your pipe heating cable within reach of any livestock, horses etc. the cable should be protected or at least obscured from the animals... i.e. no biting or chewing the heating cable please!
Need help? Contact our experts!
Phone: 0121 281 8163