40W Suntech Solar Panel

Sorry! Unfortunately this product is no longer available. You may be interested in the:

30W Sunpower SPR30 Solar Panel
or
50 Watt Kyocera Solar Panel KC50GX-2P with MC Leads

Suntech’s highly efficient 40 watt solar panel is ideal for off-grid and remote power systems. With a 25 year warranty, this 40w solar panel combines high efficiency with a long operational lifetime to provide a reliable solar panel that is suitable for many applications at home, caravans, boats etc.

The 40w Suntech solar panel's unique 36 monocrystalline silicon textured solar cell surface and bypass diode design is critical for the module to fully utilize and absorb sunlight and offer the maximum usable power per square foot of solar array. Coupled with a heavy-duty anodized aluminium frame with convenient mounting points and drainage holes, the 40 watt Suntech is a solar panel that is truly built to last, even in the most rigorous climates.

Features and benefits


• 36 Highly efficient Suntech Power Silicon Solar Cells
• Nominal 12 V DC for standard output
• Outstanding low-light performance
• High transparent low-iron, tempered glass
• Unique techniques give the panel following features: esthetic appearance, withstands high wind pressure and snow load, plus easy installation.
• Unique technology ensure that problems of water freezing and warping do not occur.
• 25 year module output warranty

Specifications


• Cell mono-crystal Silicon 125mm x 31.25mm
• No. of Cells & Connections 36 Cells in Series
• Open Circuit Voltage (Voc) 21.6V
• Maximum Power Voltage (Vpm) 17.2V
• Short Circuit Current (Isc) 2.62A
• Maximum Power Current (Ipm) 2.32A
• Maximum Power at Standard Test Conditions 40W
• Dimensions 537 x 665 x 30 (mm)
• Weight 4.5kg

Click to View PDF Document: Suntech STP040-12/RB Technical Specifations

Installation Basics: Solar panels are not supplied as standard with any mounting brackets or cables other than the industry standard connections for 'national grid installations'. This is because even though solar panels are relatively simple to install, virtually every installation is a bespoke project with unique requirements. Most end user customers and installers prefer to source their own cables and brackets based on these specific requirements.

For connections to a battery, or battery-bank you will require 'Twin Sheathed (Double Insulated) 2 Core Cable for the connections from your panel/s to the charge controller and then to the battery/ies. The cable must be rated to the required amperage for your installation and is available from any good local electrical/DIY retailer, or your installer.

Likewise, the means of securing your solar panel in position are as many and varied as the applications for which solar panels can be used. For boat, caravan, motor home user it can be as simple as using a professional strength adhesive such as Sikaflex (also available from any good Chandlery – but you will have to sell the solar panel with your boat etc. as it’s there to stay!). For walls, tiled roofs, sheds, poles etc you will need to buy/create different means of fixing.

Should you prefer for us to put together a basic 'installation kit' that is based on the solar panel/s you order here, please provide the necessary information by Emailing us here with as much relevent information as possible including: Where you wish to mount the panel/s, distance to batteries, etc.

View more Mid to High Power Solar Panels

or

Our Solar Home Page.