General Information
If you are looking for a good all round, low cost charge controller; the Sunsei branded 10 Amp Charge Controller from ICP should fit the bill.
This 10A solar charge controller prevents solar panels of approximately 200 watts or less from overcharging your battery and makes the charge controller ideal for use with small and medium size individual solar panels, or series of solar panels, so long as the combined power production does not exceed 10A.
Features
- Suited for use with most batteries and solar panels from 10 watts up to a maximum of around 200 watts
- Reliable overcharge protection for 12V batteries
- Reduces system maintenance
- Built-in status LED indicators
- Installs in minutes
- Incorrect Wiring Protection – Reverse battery and solar panel protected
- Terminal Block for simple wire connections.
Specifications
Model Number: CC-10000
Maximum Load: 10 amps
Nominal Voltage: 12V
Array Voltage MAX (Voc): 30V
Charging Current, Continuous (I): 10A
Operating Voltage at Battery, Min: 7V
Current Consumption Quiescent (Night): 2mA
Boost Charge Voltage (2 Hours): 14.5V
Float Charge Voltage: 13.7V
Regulation Accuracy: ±0.150V
Voltage Drop, Array to Battery: < 170 mV
Dimensions: 57 mm x 70 mm x 28 mm
Weight: 0.26 lbs / 120 g
Operating Temperature Range: 40 to 50 °C / -40 to 122 °F
Warranty: 2 years
You must make sure that your solar system will not exceed the maximum current specification of the controller (10A).
Please click here to view our full range of Solar Panels.
