General Information
This is a highly efficient solar panel is made up of crystalline silicon cells and delivers 50 Watts to charge up the batteries connected to your electrical device.
ICP’s award winning patented plug’n’play technology means that installing and adding panels can now be done in seconds with the included quick-connect jumper wire increasing power in a matter of seconds!
The SolarPRO solar panels are all ideal for travelers and vacationers alike, the solar panels will provide supplemental power to RV, marine or cabin batteries. Ideal for running lights and small appliances, anything from TVs and DVDs to satellite dishes or computers, radios and water pumps or fence energisers. These solar panels produce clean, quiet and dependable energy, the essential starting point for a complete solar solution
The solar panel is supplied with a full installation kit and either as a stand alone unit or with a 7 Amp or 21 Amp regulator, which prevents overcharging of the battery/batteries.
This solar panel has a life long guarantee.
Features
- Exclusive LED display charging level indicator
- plug’n’play award winning technology corners for easy installation and expandability
- High efficiency crystalline cells
- Aerodynamic heat-dissipating aluminum frame
- Impact resistant tempered glass
- Fully weatherproofed
- Lifetime warranty on power production
- 6 stainless steel mounting brackets and screws
- 10 ft (3 m) 12-gauge (2 mm) power cable
- 1.5 ft (0.46 m) 12-gauge (2 mm) jumper wire
Specifications
Item Number: 20509 / 20508 with 7 ampere Charge Controller
Trademark Name: SolarPRO
Power Rating: 50W (3.3A @ 15V)
Approx. Watt-Hrs / Day: 200 - 250 (Based on 4 to 5 hours of average daily peak sunlight hours)
Approx. Amp-Hrs / Day: 13 - 17 (Based on 4 to 5 hours of average daily peak sunlight hours)
Operating Temperature: -40ºF to 176ºF / -40ºC to 80ºC
Warranty: Lifetime
Weight: (lb/kg) 15 / 6.8
Unit Dimensions: (in/mm) 41 x 20 x 1.4 / 1041 x 508 x 36
Installation Basics: Solar panels are not usually supplied as standard with any mounting brackets or cables other than the industry standard connections for “national grid installations”. This is because even though solar panels are relatively simple to install, virtually every installation is a bespoke project with unique requirements. Most end user customers and installers prefer to source their own cables and brackets based on these specific requirements.
For connections to a battery, or battery-bank you will require “Twin Sheathed (Double Insulated) 2 Core Cable for the connections from your panel/s to the charge controller and then to the battery/ies. The cable must be rated to the required amperage for your installation and is available from any good local electrical/DIY retailer, or your installer.
Likewise, the means of securing your solar panel in position are as many and varied as the applications for which solar panels can be used. For boat, caravan, motor home user it can be as simple as using a professional strength adhesive such as Sikaflex (also available from any good Chandlery – but you will have to sell the solar panel with your boat etc. as it’s there to stay!). For walls, tiled roofs, sheds, poles etc you will need to buy/create different means of fixing.
Should you prefer for us to put together a basic “installation kit” that is based on the solar panel/s you order here, please provide the necessary information by Emailing us here with as much relevent information as possible including: Where you wish to mount the panel/s, distance to batteries, etc.
View more Mid to High Power Solar Panels
or
Our Solar Home Page.
