General Information
This Non-crystalline, 'thin film' (amorphous) 18 Watt solar panel is suitable for providing good solid battery charging for a multitude of 12V appliances including of course, your electric fence leisure battery.
The 18W Sunsei SE-1200 (previously sold as the BatterSAVER SE) is a versatile solar panel for use with electrical appliances such as lights, refrigerators, TVs, VCRs, heaters, stereos, computers and microwave ovens to name just a few. As your needs grow, you can combine as many panels as you wish to increase power.
The solar panel will work quite happily under low lighting conditions such as when raining, when generally overcast or even when covered by up to 7.5cm of snow.
This solar panel is supplied with a full installation kit. There is also an optional 6 Amp Charge Controller that prevents overcharging of the battery - A necessity for most users. The panel also has user friendly plug and play corner connectors that make it easy to add more panels if/when required.
This solar panel has a 5 year power guarantee.
Features
- Verify sunlight exposure by the push of a button (Blue LED)
- Constantly charges your large battery via your connection of choice, includes a complete accessory wire set
- Easily install multiple panels when you need more power (with Plug’n’Play side connector to facilitate panel-to-panel installation)
- Efficient under low-light and extreme outdoor weather conditions such as hail, snow, or elevated temperatures and under low light conditions
Specifications
Item Number: SE-1200 / SE1201 with 6 ampere Charge Controller
Trademark Name: Sunsei
Power Rating: 18W (1200 mA @ 15V) (Assumes Solar panel charging in full sunlight. Solar panel connected to electronic through cigarette lighter adapter)
Operating Temperature: -40ºF to 140ºF / -40ºC to 60ºC
Warranty: 5-year
Accessories included:
- Extension power cable (10ft / 3m)
- Panel-to-panel jumper cable (1ft / 0.3m)
- O-ring connector wire (1.5ft / 0.46m)
- Battery clamp wire (1.5ft / 0.46m)
- Male CLA adapter cable (1.5ft / 0.46m)
- Female 12V socket cable (1.5ft / 0.46m)
- Mounting stainless screws (4)
Construction: Amorphous silicon, resin coated plate, ABS plastic frame, two plug’n’play side connectors, test push button and blue LED
Weight: (lb/kg) 9.5 / 4.3
Unit Dimensions: (in/mm) 39.37 x 13.78 x 1.18 / 1000 x 350 x 30
Please click here to view our full BatterySAVER SE range.
Please click here to view our full range of Solar Panels.
|
